HelioRC SPRING Mini 20x20mm – IMU-F F4 Flugsteuerung

HelioRC SPRING Mini 20x20mm – IMU-F F4 Flugsteuerung

Everything you would expect from a normal sized FC packed into this awesome 20x20mm format! Thats the new Helio Mini!

Bring the smoothest flight experience on the market to your racer or freestyle quad.

• Truly Freeing with HelioRC
This flight controller runs multiple multiple open source flight controller firmwares including the latest Butterflight, Betaflight, iNav, and others.

• Helio’s IMU-F
The hardware contains both an f3 and an f4. The gyro is the ICM 20601.
The IMU-F system is an advanced inline discretely filtered gyro that is transparent to the flight controller.
More processing power is available for flight controller logic and future feature updates without causing slowdown or other issues during flight.

• Natively Fast
True 32khz processing without overclocking.
More than capable of 32khz pid-loop speeds even on an F4.

Specifications
• Mounting: 20x20MM
• Processors: F4 & F3, STM32F405 & STM32F301
• IMU: ICM 20601
• OSD: Full Betaflight OSD support
• Motor Outputs: Full DSHOT and MULTISHOT support
• Receiver Support: PPM, S.Bus (inverter built-in), DSM, HoTT, SRXL, CSRF, FPort ready. 5V or 3.3V supply for receiver
• Telemetry Support: FrSKY Smart Port, FrSKY Sensor Hub, HoTT Telemetry, SRXL, CSRF, FPort ready. Built-in inverter for FrSKY telemetry
• Serial Ports: 5 full serial ports (UARTs). UART1 and UART2 have inverters for S.Bus and SmartPort telemetry
• Buzzer Port: Dedicated port for 5V (100mA max) buzzers
• Analog Inputs: Voltage sensing up to 26V, current and RSSI inputs (3.3V max).
• Power: VBAT up to 6s with voltage regulator 2.5A continuous 3.2A burst. Or 5v in (switchable with jumper pads)
• LC filter: Yes, on OSD line
• Filtered camera power: YeS

Lieferumfang
• 1x HelioRC SPRING Mini 20x20mm – IMU-F F4 Flugsteuerung