JHEMCU F722 Betaflight Flight Controller 2-6S OSD 5V/2A BEC Current with 25V/1000uF Capacitor 30x30mm

JHEMCU F722 Betaflight Flight Controller 2-6S OSD 5V/2A BEC Current with 25V/1000uF Capacitor 30x30mm

Sepezifikation:
• Markenname: JHEMCU
• Artikelname: F722 Betaflight Flight Controller w/ 25V Capacitor
• MCU: 216MHz STM32F722RET6
• IMU: ICM20689(32K), SPI
• Baro: BMP280 (I2C)
• OSD: AT7456E (SPI)
• Blackbox: W225Q128(16MB)
• 5x Uarts (1,2,3,4,6) with build-in inversion
• 6x Dshot/Proshot/oneshot outputs
• 1x I2C
• RX6 pad(one per cornet) for BLheli32 ESC telemetry
• 4x individual ESC power/signal pads
• 1x Group of GND/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
• +5V filtered output power for VTX
• switchable via AUX (modes tab-user1/user2)
• Smartaudio & Tramp VTX protocol: Yes
• WS2812 Led Strip : Yes
• Beeper : Yes
• RSSI: Yes
PDB Specifications
• Input: 7.4~26V (2~6S LiPo) w/TVS protection
• PDB: 4x40A (Max.4x50A)
• BEC: 5V 2A cont. (Max.3A)
• LDO 3.3V: Max.300mA
• FC Firmware: BetaFlight
• Target: JHEF7DUAL.hex
• Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
• Dimensions: 45*49mm
• Gewicht12.8g

andere detailierte Informationen:
• GND: Ground
• +5V: BEC 5V 2A cont.MAX.3A
• 3.3V: LDO3.3V,MAX.300MA
• VBAT+: share Lipo power
• B+(+) B-(-): LiPO&ESC Power pads 7.4V-26V(2-6S)
• S1,S2,S3,S4,S5,S6: ESC Signal
• IO1,IO2: Switch pin IO(ON/OFF,Modes tab/USER1/USER2)
• VOUT: Video output for video Transmitter
• VIN: Camera Video input
• BUZ+ BUZ-: General active 5V buzzer for dbuz 5V
• RSSI: Receiver RSSI INPUT
• LED_Strip: WS2812 LED signal
• SCL & SDA: I2C_SCL & I2C_SDA
• RX1 & TX1: UART1
• RX2 & TX2: UART2(RC Receiver,SBUS,IBUS,DSM,/ PPM share RX2 pad)
• RX3 & TX3: UART3
• RX4 & TX4: UART4
• RX6 & TX6: UART6

Lieferumfang:
• 1x JHE F7 Flight Controller
• 4x silicon grommets M3
• 1x 25V/470uF Capacitor
• 1x 25V/1000uF Capacitor