Matek HUBOSD8 SE mit 5V 10V BEC Stromsensor und OSD

Matek HUBOSD8 SE mit 5V 10V BEC Stromsensor und OSD

Eigenschaften
• Input: 9~27V (3-6S LiPo)
• Input TVS protection
• Current Rating: 4X30A (Max.4x46A)
• Current sensor 184A
• Built-in STOSD8-SE
• 46x36x4mm, 9g
• Mounting holes 30.5mm Ø3mm

BEC 10V Outputs
• Designed for Video TX or FPV camera.
• Voltage: 10.0 +/- 0.2VDC
• Continuous current: 1.5 Amps (Max.2A 10s/minute)
• Output Ripple: 15mV (VIn=24V, VOut=10V@1.5A load)
• Short-circuit tolerant (2 seconds/minute)
• 10V can be used to power cameras labeled as 12V

BEC 5V Outputs
• Designed for RC Receivers, Flight controllers, OSD, and Servos.
• Voltage: 5.0 +/- 0.1VDC
• Continuous current: 1.5 Amps (Max.2A 10s/minute)
• Output Ripple: 23mV (VIn=24V, VOut=5V@1.5A load) Short-circuit tolerant (2 seconds/minute)

STOSD8
• Autodetect PAL/NTSC
• Dynamic on screen info
• Automatic flight timer
• Automatic cell detection
• Low battery alarm
• Exceeding mAh alarm
• Min.voltage & Max.current recorder
• Onscreen Pilot ID
• Firmware upgradable
• Simple GUI & setting
• Plug & Play

Lieferumfang
• 1x Matek HUBOSD8 SE mit 2 BEC Stromsensor und OSD, Befestigungsmaterial, Kondensator 34V 470uF